Radyne DMD2050, Operation Manual

Page: 18 / 214

Introduction DMD2050 Universal Satellite Modem
1-2 TM110 - Rev. 1.3
1.1 DMD2050 Configurations
The DMD2050 can be configured in the following different ways:
ƒ
features and options that are installed when the unit is ordered
ƒ
feature upgrades
ƒ
hardware options that the user can install at their own location
ƒ
options that are installed to a unit that is sent to a Radyne facility
1.1.1 Features/Options Installed at Time of Order
Features installed at the time of ordering are the options pre-installed/initialized in the factory prior
to shipment. These can be reviewed from the front panel. Refer to Section 4, User Interfaces for
information on how to view these features.
Factory installed options are chassis and board configurations that are introduced during
manufacture.
1.1.2 Feature Upgrades
Feature Upgrades are a simple and quick way of changing the feature set of an installed modem.
Feature upgrades are how most DMD2050 options are implemented. Features may be
purchased at any time by contacting a Radyne Inc. salesperson. Refer to Section 4 and
Appendix D, for information on how upgrade features.
1.1.3 Hardware Options
Hardware options (refer to Appendix A) are purchased parts that can be installed into the unit at
the customer’s site. A screwdriver is normally the only tool required. Please contact the Radyne
Inc. Customer Service Department for information not limited to availability and to shipping costs.
Only authorized service personnel should handle and install optional
hardware options.
1.1.4 Radyne Installed Options
Units may also be sent to the Radyne Inc. facility for hardware option installation. Please contact
the Radyne Inc. Customer Service Department for information not limited to availability and to
shipping costs.
1.2 Function Accessibility
All functions can be accessed with a terminal or personal computer via a serial link for complete
remote monitoring and control capability.