RADWAG PUE HY10, User Manual

Page: 169 / 305

169
Procedures for carrying out an entrance transaction and an exit transaction
are the same, therefore the further part of the user manual contains description
of an entrance transaction only.
Before starting a transaction enter to scale memory general parameters
of the working mode (see point 33.2 of this user manual).
Procedure:
•
Press hot-key to select a required vehicle, which opens the
following window:
Where:
PL 45332
- A vehicle with saved registration number
Entry
- Transaction type (entrance)
Confirm weighing 1 - A message for an operator. The scale waits
for accepting the weighment on entrance