RADWAG PUE HY10, User Manual

Page: 301 / 305

301
Autozero Enter this parameter to enable automatic control and correction of
zero indication. There are, however, some cases when this
function can be a disturbing factor for the measuring process. e.g.
very slow placing of a load on the weighing pan (load adding, e.g.
pouring, filling). In such case, it is recommended to disable the
function. Available options: - function disabled, - function
enabled.
Last digit Enter this parameter to enable/disable display of the last digit
(placed on the right of the decimal point) of the weighing result.
Available values
: Always : all digits are displayed; Never : last digit
disabled; When stable : last digit displayed only when the result is
stable.
53.2. LO Threshold for automatic functions
<LO threshold> parameter allows you to configure the function of automatic
operation. The next measurement is saved when mass indication gets below
the set net value of
<LO threshold> parameter.
Procedure:
•
Enter < Weighing / LO threshold> submenu, an on-screen
keyboard is displayed.
•
Enter LO threshold value and press button.
53.3. Automatic adjustment
Automatic adjustment using internal adjustment weight is carried out in 3
different cases:
•
Triggered by plugging the instrument to the mains.
•
Triggered by temperature change (by 3°C).
•
Triggered by passage of specified time interval (every 3h).
Enabling < Automatic adjustment> parameter :
•
Enter < Weighing> submenu.
•
Select < Automatic adjustment> parameter and set respective value
( - function disabled, - function enabled).
Automatic adjustment process:
•
Upon detecting the need for carrying out an adjustment process, the
following message is displayed: