12
4.4. Standard accessories
•
Balance.
•
Weighing pan and protecting elements.
•
Power
adapter.
•
User
manual.
4.5. Cleaning
Balance should be cleaned with damp cloth. In order to clean the weighing pan of
the balance, please remove it from the weighing chamber. Cleaning of the pan
when installed may cause damage of the measuring system of the balance.
4.6. Connection to mains
Balance can be connected to mains only with a power adapter offered as
standard accessory to the balance. Nominal power supply of the power adapter
(specified on the data plate of the power adapter) should be compatible to the
power from mains. Please plug the adapter the socket at the back of the balance,
the display with light on and show sequence of digits – display test), after which
balance will display 0.0000g. if indication is different from zero, please press
ESC/TARA button
.
4.7. Connection of additional equipment
The balance must be disconnected from the mains before connecting or
disconnecting additional equipment (printer, PC) to or from the data interface.
Use only accessories and peripheral equipment recommended by the
manufacturer with your balance. These have been ideally coordinated to your
balance.
5. BASIC FUNCTIONS OF THE INSTRUMENT
Electronic balance
is appropriate for precise measurements mass in laboratory
conditions with possibility of setting to zero in all measure range. Balance
calibration is done by
F
on balance keyboard.
9
Functions for weighing units (press Units key)
-
select default units of weighing
<StUn>
,
-
Weighing in grams,
-
Weighing in [mg],
-
Weighing in [ct],
-
Weighing in units from beyond
SI
(only: [oz], [ozt], [dwt], [t], [mom], [gn],
Access to these units is blocked from factory menu level,
Summary of Contents for AS series
Page 2: ...2 MARCH 2009...
