64
14.3. Setting type of operating for RS 232 joint
Procedure:
rEPL
no
–
manual operating
/ after pressing
key
rEPL
YES
- automatic operating / after stabilization of weighing
result.
Return to weighing
(see - 7.1.2. – return to weighing).
Automatic operating takes place according to following scheme:
press TARE key to zero the balance (display will indicate marker of
stable measurement and marker of zero)
place the load, balance will send through the RS232 first stable
measurement
remove load from the pan,
next measurement will be possible when weighing /- 50
reading units referring to zero (by next measurement zero stat is not
required).
Summary of Contents for AS series
Page 2: ...2 MARCH 2009...
