RADVision VIU-323, User Manual

Page: 36 / 129

Installing the VIU-323
3-8
"
To connect the VIU-323’s console port to a modem
1. Verify the modem configuration parameters are as specified above.
2. Connect the 9-pin male connector of the cable to the VIU-323’s console port.
3. Connect the 25-pin female connector on the other end of the cable to the modem.
4. For remote diagnostics, create a normal dial-up connection. For information, see
Chapter 8, “Creating a Dial-Up Connection to the VIU-323.”
Next Step: Configuration
Now that you have installed the VIU-323, you have to configure it. The configuration
process is detailed in the next two chapters, which are summarized in the following table:
Chapter Description
Preparing for Configuration Gives guidelines for planning the configuration process
as well as instructions for setting up the configuration
terminal with the OnLAN Configure 323 configuration
software.
Basic Configuration Guides you through the essential configuration
procedures for the VIU-323. Once these are complete,
you can make calls through your VIU-323.
If you are installing and configuring the VIU-323 for the first time, read Chapter 4,
“Preparing for Configuration” before configuring.