RADVision VIU-323, User Manual

Page: 41 / 129

4-3
Configuration PC Requirements
The configuration PC must:
! Have Windows 95/98/NT installed.
! Have network software that is Winsock 1.1 compatible installed (for example,
Microsoft TCP/IP Stack for Windows 95/98/NT).
! Reside on the same LAN segment as the VIU-323 you want to configure.
! Have an IP subnet mask that matches the IP subnet mask of the VIU-323 you want to
configure.
! The OnLAN Configure 323 system configuration software, installed.
Installing the Configuration Software
The VIU-323 setup procedure installs the configuration program OnLAN Configure 323 on
your hard drive.
"
To install OnLAN Configure 323
1. Start Windows.
2. Insert the VIU–323 CD ROM in your CD drive
3. The RADVision OnLAN Tools Setup window displays. If it does not display
automatically, access the CD ROM using Windows Explorer and invoke the
Setup.exe
file.
4. Follow the onscreen instructions for installation.
Upgrading the Configuration Software
Upgraded versions of VIU-323 software may also require that you upgrade the OnLAN
Configure 323 software configuration program (check the release notes that accompany the
software).
To upgrade OnLAN Configure 323, follow the steps in “Installing the Configuration
Software,” above. Note that if you install the new version of OnLAN Configure 323 to the
same directory of the previously installed version, you will overwrite the original; to keep
the previous version, install the new version in a different directory.