RADVision VIU-323, User Manual

Page: 45 / 129

5-1
Configuration Checklist
The following checklist reviews the tasks required to configure the VIU-323:
❒
Unpack the VIU-323, check the package contents, and set up the unit (see Chapter 3,
“Installing the VIU-323”).
❒
Connect the VIU-323 to the LAN (see Chapter 3, “Installing the VIU-323”).
❒
Record all configuration parameters in the configuration prerequisite checklist (see
Chapter 4, “Preparing for Configuration”).
❒
Install the system configuration software, OnLAN Configure 323, on the configuration
PC (see Chapter 4, “Preparing for Configuration”).
❒
Make sure the configuration PC is connected to the LAN.
❒
Configure the VIU-323 from the configuration PC, as explained in this chapter.
Configuring the VIU-323
Setting IP Addresses via a Terminal Session
Normally, you set VIU-323 IP address parameters (IP address, default router IP address and
IP subnet mask), and all other VIU-323 parameters, using the system configuration
software, OnLAN Configure 323, as explained in "Selecting the VIU-323 for
Configuration".
Alternately, you can first connect the configuration PC to the VIU-323 console (serial) port
with a null modem cable and run a terminal session to set all IP address parameters; then run
OnLAN Configure 323 to configure the VIU-323. For information, see “Defining IP
Addresses via a Terminal Session” in Chapter 9, “Tips and Troubleshooting.”
Running OnLAN Configure 323
OnLAN Configure 323 is the name of the system configuration software used to configure
the VIU-323.
"
To start configuration
! From Windows 95/98/NT, click the Start button and select Programs/RADVision
OnLAN Tools/OnLAN Configure 323 .