RADVision VIU-323, User Manual

Page: 58 / 129

Configuration
5-14
Saving Configuration Parameters to the VIU-323
The Confirm screen allows you to upload the configuration parameters to the VIU-323. For
the configuration changes to take place, you have to upload them to the unit.
Figure 16 - Confirm Configuration screen
"
To transfer the configuration parameters to the VIU-323
•
Click Yes in the Confirm screen. An ‘Updating node parameters’ message is
displayed while the system transfers the parameters to the VIU-323.
The VIU-323 restarts upon the uploading of the new configuration. Wait for the VIU-323 to
complete the restart process before you operate it. The unit may take longer to restart than
the time allotted in the transferring time bar displayed by the configuration software.
After Configuration
The VIU-323 is now configured. You can configure another VIU-323, or you can run calls
using the VIU-323, refer to the proceduresd and examples in the following chapter.