Accessing the Quick Setup Procedure
About this task
Access the quick setup procedure to define basic settings for your Scopia XT Series, such as the
system's name, language, and network settings. Follow the tasks of the quick setup procedure in the
order they are presented.
This is relevant for both new installations, and also after restoring default settings and re-installing
software.
You can do this procedure from the endpoint itself or from the XT Series web interface.
Before you begin
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up PIN
protection, you need the PIN number before continuing with the configuration.
Procedure
1. The quick setup wizard automatically appears the first time you access the Scopia XT Series,
either by turning on the XT Codec Unit or logging in to the web interface.
If the quick setup wizard is not displayed automatically when you first turn on the XT Codec
Unit, select
Configure
>
Quick Setup
from the Main Menu.
Figure 13: Accessing the Quick Setup
2. The quick setup wizard guides you through these basic configuration tasks:
•
Setting the System Name and Language
on page 24: Define your system's name,
your country, and preferred language for the interface.
•
Adjusting the Image Position
on page 25: Adjust your monitor's image if necessary.
User Guide for Scopia XT5000 Series Version 3.2
Getting Started | 23
