O
WNER
’
S
M
ANUAL
1. Push forward on the battery compartment cover (on the back of the
remote) and lift it off.
2. Slide the AAA batteries into the compartment as indicated by the
polarity symbols (+ and –) shown above.
3. Align the cover with the compartment opening and slide it back
into place.
4. If batteries are inserted correctly, the display will turn on and show all
keys. If a key is not pressed after 7 seconds, the display will turn off.
NOTE
: The batteries will need replacement if one of the following conditions occurs:
1.
The top IR segment flashes five times after pressing a key.
2.
The Tilt Switch (if enabled, see page 38) no longer activates the remote and
only pressing a key turns on the display.
A
BOUT
T
HE
F
INDER
T
RANSMITTER
NOTE
: If you do not plan to use the Finder Transmitter, store it away for future
use and skip this section.
Included in the package is a Finder Transmitter that you can use to
audibly locate a lost or misplaced RadioShack 8-in-One Remote. The
unit also comes with double-sided “hook and loop” tape for use in
mounting it on a TV cabinet side or other surface.
The Finder Transmitter requires a 9-volt battery for power. For best
performance and longest life, we recommend using a RadioShack
alkaline battery.
continued on next page...
Installing Batteries
5
❶
❸
❷
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 5
