O
WNER
’
S
M
ANUAL
5. On the RadioShack 8-in-One Remote, select and press a desired key
where the learned function will be stored. The IR segments will display
an incoming animation, continue for three revolutions, and then the
entire display will turn off.
After the display is off, press and hold the teaching key (on your orig-
inal remote control) until the display (on the RadioShack 8-in-One
Remote) turns on again.The bottom IR segment will flash twice
when the code is successfully captured.
NOTE
: If the bottom IR segment displays one long flash, a learning error has
occurred. Try repeating this step again until a successful capture occurs.
If the function is still not captured, press
twice to exit programming and
review the “Learning Precautions” on page 19. If needed, also see
“Troubleshooting” on page 43. After review, start programming again at step 1.
6. To learn other functions, repeat steps 3 through 5 as desired.
7. To exit programming, press
twice. The display will return to the
last-selected device menu screen.
D
ELETING
A S
INGLE
L
EARNED
K
EY
1. Press and hold
P
until the bottom IR segment flashes twice.
The program keys will appear:
2. Press above
IR DELETE
once. The
IR Delete
programming screen
will appear:
3. Press a device key once (i.e.,
CBL
,
SAT
,
TV
,
DVD
,
AUD
,
VCR
,
AUX
, or
CD
)
for the mode where the learned key to be deleted resides. The selected
device menu screen, including
, will be displayed.
4. Press the learned key to be deleted twice. Upon deletion, the bottom
IR segment will flash twice as confirmation. The program keys will
appear again.
continued on next page...
2"
Using Learning
21
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 21
