Radio Shack Univer 15-2138, Owner'S Manual

Page: 29 / 59

O
WNER
’
S
M
ANUAL
2. Press below
OTHER
once. The Other programming screen will appear:
3. Using the number keys, enter 9 9 4 . The bottom IR segment will
flash twice.
4. For the source mode, press a desired device key once (i.e., CBL , SAT ,
TV , DVD , AUD , VCR , AUX , or CD ). For this example, press TV once. The
selected source device menu screen, including , will be displayed.
5. For the source key, press a key to be moved once. For this example
press VOL
▲
once.
6. For the destination mode, press a desired device key once (i.e., CBL ,
SAT , TV , DVD , AUD , VCR , AUX , or CD ). For this example, press DVD once.
The selected destination device menu screen, including , will
be displayed.
7. For the destination key, press a key to be moved once. For this example
press VOL
▲
once. Upon keymoving, the bottom IR segment will flash
twice as confirmation. The program keys will appear again.
8. Repeat steps 2 through 7 two more times to map the remaining
volume control keys, substituting VOL
▼
and MUTE as source and
destination keys in steps 5 and 7.
9. Exit programming by pressing once. The display will return to the
last-selected device menu screen.
Upon completion of the above procedure, you can now use your
RadioShack 8-in-One Remote to control the TV’s volume and mute in
the DVD mode, as well as in the TV mode.
R
ESTORING
A S
INGLE
K
EYMOVED
K
EY
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
continued on next page...
Using Keymover 29
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 29