O
WNER
’
S
M
ANUAL
6. Exit programming by pressing
once. The display will return to the
last-selected device menu screen.
7. To test the power macro, first make sure all home theater devices
selected in step 4 are turned on.Aim the remote control at the
devices and press
MY SYSTEM
once, followed by
PWR
once. The
devices should turn off in this order: Satellite Receiver, DVD Player,
Audio Receiver, and TV.
To turn on the devices on again in the same order as above, press
PWR
once.
P
ROGRAMMING
T
HE
COM MUTE K
EY
If desired, a two-state rotating macro can be programmed onto the
COM
MUTE
key, so a key press will drop volume (in the
CBL
,
SAT
,
TV
,
VCR
, or
AUX
mode) to a preset level during a commercial. When the program
resumes, another key press will raise it back to the original level.
1. Press and hold
P
until the bottom IR segment flashes twice.
The program keys will appear:
2. Press above
MACRO
once. The
Macro
programming screen will appear:
3. Press
COM MUTE
once. The last-selected device menu screen, including
, will be displayed.
4. Enter the first macro sequence by pressing
TV
once, then press
VOL
▼
four times (to lower the volume four steps).
5. To save the macro, press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear again.
6. To program the second macro, repeat steps 2 through 5, but substitute
VOL
▲
for
VOL
▼
this time (to raise the level four steps).
7. Exit programming by pressing
once. The display will return to the
last-selected device menu screen.
continued on next page...
Using Macros
27
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 27