8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
USING MACROS
P
ROGRAMMING
A F
AVORITE
C
HANNEL
M
ACRO
(
CONTINUED
)
NOTE
: If there are more than 15 key presses in the sequence, the bottom IR seg-
ment will display a long flash, denoting an error. The display will return to the
last-selected device menu screen. To program the macro, start again with step 3.
5. To save the macro, press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear again.
6. Exit programming by pressing
once. The display will return to the
last-selected device menu screen.
7. Now, if you aim the remote at the devices selected in step 4 and press
the programmed macro key once, the TV will turn on and tune to
channel 3. Then, the Cable Box will turn on and tune to channel 071.
P
ROGRAMMING
A M
ASTER
P
OWER
M
ACRO
I
N
M
Y
S
YSTEM
M
ODE
A macro can be programmed onto the
PWR
key to turn on or off as
many as seven home theater devices.
NOTE
: This following example assumes the Home Theater system contains a
Satellite Receiver, a DVD Player, an Audio Receiver, and a TV.
1. Press and hold
P
until the bottom IR segment flashes twice.
The program keys will appear:
2. Press above
MACRO
once. The
Macro
programming screen will appear:
3. Press
PWR
once.The last-selected device menu screen, including
,
will be displayed.
4. Enter the macro sequence. For this example, press
SAT
once, followed
by
PWR
once. Next, press
DVD
once, followed by
PWR
once. Then press
AUD
once, followed by
PWR
once. Finally, press
TV
once, followed by
PWR
once, and then
MY SYSTEM
once.
5. To save the power macro, press and hold
P
until the bottom IR segment
flashes twice.The program keys will appear again.
26
Using Macros
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 26
