Radio Shack PRO-79 Owner'S Manual Download Page 32

Page: 32 / 52

2. Press

MON/CL

, a monitor memory number, and

flash,

and the frequency in the selected monitor memory appears.

3. Enter the desired monitor memory’s number (1–20), then

press

MON/CL

again. The selected monitor memory’s fre-

quency appears.

4. Press

ENT

. The scanner stores the frequency in the selected

channel.

5. To move another monitor memory frequency to the next

channel, press

PGM

and repeat Steps 2–4.

SCANNING THE STORED CHANNELS

To set the scanner to continuously scan through all channels
with stored frequencies, simply press

SCAN

and

▲

ap-

pear, and the scanner begins to rapidly scan until it finds an ac-
tive frequency.

When the scanner finds an active frequency, it stops and dis-
plays that channel and frequency number, then it automatically
begins scanning again when the transmission on that frequency
ends.

Notes:

• To reverse the scanning direction, press

▲

▼

• To set the scanner to remain on the current channel for 2

seconds after the transmission ends, see “Delay” on
Page 36.

• To set the scanner to remain on the current channel, even

after the transmission stops, press

MAN

at any time during

the transmission so

MAN

appears and

SCAN

disappears

(see “Monitoring a Stored Channel” on Page 33).

• To lock out channels so the scanner does not stop for a

transmission on those channels, see “Locking Out Channels
or Frequencies” on Page 36.

20-314.fm Page 32 Monday, December 13, 1999 12:55 PM

Summary of Contents for PRO-79





















































Search results

Summary of Contents for PRO-79

Reviews:

Related manuals for PRO-79

Brands by name

Popular brands

Radio Shack PRO-79, Owner'S Manual

Search results

Summary of Contents for PRO-79

Reviews:

Related manuals for PRO-79

Brands by name

Popular brands