background image

31

• If you entered a frequency that is already stored in

another channel, 

-dUPL-

 (duplicate) and the lowest-

numbered channel containing the duplicate frequency
flash on the display for about 3 seconds. If you want to
store the frequency anyway, press 

ENT

 again.

4. To store the displayed frequency in a monitor memory,

press 

MON/CL

M

, the monitor memory number, and the fre-

quency flash twice.

5. To search for another active frequency, hold down 

 or 

for about 1 second.

USING MONITOR MEMORY

Listening to a Monitor Memory

To recall a frequency stored in a monitor memory, press 

MAN

then 

MON/CL

M

, the monitor memory number, and 

CH

 flash and

the stored frequency appears. 

Note: See Step 4 under “Searching the Service Banks” on
Page 28 for more information about storing a frequency in a
monitor memory.

To select other monitor memories, enter the desired monitor
memory’s number (1—20), then press 

MON/CL

 again.

Moving a Frequency from a Monitor Memory to a 
Channel

1. Press 

MAN

, enter the channel number where you want to

store the frequency, then press 

PGM

PGM

 and the selected

channel number appear.

20-314.fm  Page 31  Monday, December 13, 1999  12:55 PM

Summary of Contents for PRO-79





















































Reviews: