Radialight KLIMA Series, Operating Instructions Manual

Page: 11 / 18

26
To display P1 Program hold button “-“ for
3 seconds.
The first day to see/modify is now
displayed (1= Monday)
Press “+” button to enter the first hour to
see/modify.
Press “M” button to choose the wished
temperature level among Comfort, Eco or
Frost Free:
→ →
The displayed temperature once you’ve
selected a specific hour of the day, is the
one currently set on the P1 Program.
Use “+” and “-“ buttons to enter each
hour of day 1 and see/modify the working
temperature of each of them.
The hour displayed always indicates the
starting point. For example: when H 23 is
displayed the modification involves the
period of time between 23:00 and 00:00.
Having modified the temperature for each
of the 23 hours of Day 1, press
further “+”
button to enter the modification mode of
Day 2.
Press “+” button to diplay/modify the
working temperature of each hour of Day
2, as descrive for Day 1.
You can set automatically the same
program of Day 1 on Day 2 by holding
the “F” button and pressing “+” button.
Note : you are allowed to copy and paste
the same daily program ONLY WHEN
the number of the day you wish to adjust
is displayed (as showed in the picture),
BUT NOT when the hour is displayed.
Once the last day (Day 7) has been set,
press “+” button to end the program
sequence.
END will appear on the display. A further
pression of “+” button will allow you to
confirm the adjusted program.