30
Alignment of the ambient temperature
This function is used to edit the ambient
temperature measured by the radiator
and used to manage heating power, if it
needs to be corrected to compensate for
reading errors due to things like being
near to heat sources, or cold air
draughts.
The display flashes the correction value
to be applied. To edit it, push the “+” or “-
“ keys.
If, for example, the temperature set on
the radiator is 19,2°C and the ambient
temperature is measured at 19,5°C, align
it by +0,3°C.
Always wait at least 4 hours for the
temperature to settle, before doing any
alignment.
Remote control
This function allows the radiator to be
controlled using external timers, piloted
sockets with telephonic control, and
similar devices.
For further details see paragraph 6.3.3.
Switching the function (ON) or (OFF) is
done by pushing the “+” or “-“ keys
respectively.
Warning: Activation is NOT indicated by
any icon on the display.
6.3.1 Presence sensor
This function allows the radiator to pick up whether or not people are in the space, and automatically regulate the heating
level, in order to optimise comfort and energy saving.
Thanks to this function, which can only be activated in Comfort mode, the radiator continuously monitors the room and, if no
people are detected, it reduces the comfort temperature set as follows:
Period
of absence
Reduction of the Comfort
temperature
Indication
on the display
60 min
1,0°C
The presence sensor and comfort mode
symbols flash together
((
))
90 min
2,0°C
120 min
3,5°C
38 hours
Anti-freeze activated 7±3°C
The reduction is temperature always relates to the comfort temperature. If the radiator is in Eco or Anti-freeze mode, no
change in temperature to be maintained in the room will be observed.
Should someone be detected in the room for at least 10 consecutive minutes, the temperature is automatically returned to
the comfort temperature set, without any reduction. The same happens if, while the temperature required is being reduced,
due to an absence of people being detected in the room, the "M" key is pushed.
Important:
Correct operation of this function may depend on where the radiator is positioned in the room. To choose the best
installation position, bear in mind that the sensor detects movements within the area indicated in figure 9, and that no
objects must be in its way. Presence detection is also more effective when people move in front of the sensor that when
they move towards it.
Summary of Contents for KLIMA Series
Page 3: ...3 6 8 7 click 5 click A B...
Page 4: ...4 9 3m 1m 4m 3m...
