background image

SURE HEAT

Installation and Operating Instructions for

NATURAL & L.P. GAS

VENTED GAS LOG SETS

Model: VMO24NG/VM024LP

Sure Heat Manufacturing

1861 West Oak Parkway

Marietta, GA  30062

Tel: 800-229-5647

Fax: 770-424-3842

  WARNING

: It is very important to read the instructions in this manual before starting installation.

 

    -  Do not attempt to modify or alter the construction of the fireplace or its components. 

      Any modification or alteration may void the warranty of these units.

   

  WARNING

: Solid fuel shall not be burned in a fireplace where a decorative appliance is installed.

WARNING:

 If the information in this manual is not followed exactly, a fire or explosion 

may result causing property damage, personal injury or loss of life.

-  Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

-  WHAT TO DO IF YOU SMELL GAS:

  •  Do not try to light any appliance.

  •  Do not touch any electrical switch; do not use any phone in your building.

  •  Immediately call your gas supplier from a neighbor’s telephone. Follow the gas supplier’s instructions.

  •  If you cannot reach your gas supplier, call the fire department. 

-  Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Batteries not included. Batteries required: 3 “AAA’s” for remote and 4 “AA’s” for remote receiver.

Summary of Contents for VM024LP













Reviews: