Software Utility
3-13
3.5 Using the CRT/TV Features
(TV-out function optional)
3.5.1
How to use TV-out cables correctly
Caution!
Before you turn on your system, you have to be sure the VGA card is
setup already and all the cables are connected.
DO NOT connect / disconnect TV-out cable when your TV or PC is
Power On.
1.
Power off your PC and TV first.
2.
Connect the signal cable the Video input at your TV form your VGA
card, and then power on your PC and TV.
3.5.2
How to change TV setting
Your graphics accelerator is configured for TV display. Using this
feature, you can connect a TV to your computer’s video output to view
the desktop.
If you are not using a TV for your computer’s display, it is
recommended that you disable TV display for optimal performance
(higher refresh rates). You can re-enable TV display at a later date.
•
For
NTSC
, 640x480x60Hz and 640x400x60Hz(hidden)
•
For
PAL
, 640x480x50Hz and 800x600x50Hz(hidden)
Turn Off
Turn Off
Summary of Contents for AT008
