Radeon AT008, User Manual

Page: 38 / 49

Software Utility
3-19
3.6 Installing on Windows NT 4.0
Basically, the installation of Windows NT 4.0 is no different from that of
Windows 95/98. Please see the following instructions assume that
you’ve installed the card to the AGP slot. This installation procedure
and usage information for the card Graphics Accelerator Windows NT
Alpha software.
Driver Installation Procedure
General Installation Notes
•
Before install Windows NT 4.0 Driver, Please install Microsoft
Service pack 5 First.
(http://support.microsoft.com/support/ntserver/content/servicepacks/defa
ult.asp)
•
The operating system must be installed on the system prior to
installation.
•
Boot up the Windows NT4.0 and configure the “VGA mode”.
Change the VGA resolution as 640x480@16 Color. Re-start
the system.
1. Start Windows NT4.0
2. Switch display to Windows’ Standard Display Adapter (VGA)
mode and then restart Windows.
3. Insert the CD installation disc into your CD-ROM drive.
4. The way of installing it is to run “ATISETUP.EXE” (for AT008) or
“MSSETUP.EXE” (for AT008V) in CD-ROM disk from Start menu.
5. Follow the on screen instruction to complete installation.
6. When Setup has finished installing all the necessary files on your
computer, it will prompt you to restart your computer. Click
Yes …
and Finish to restart your computer and to complete Setup.