2-1
Installation
2.1 What’s Included in the Package
The VGA card package includes the following:
1.
VGA card accelerator card
2.
Software diskettes which contain the necessary files
3.
This manual
2.2 Installing the Card
1.
Unplug the computer and remove the cover.
Shut down the computer and turn off any attached equipment (such as
a monitor or printer).
Unplug the power cord.
Remove the cover.
2.
Remove the current graphics card.
If there is a graphics card currently in the computer, use the following
guidelines to remove it:
Detach any cables which are attached to the current graphics card and
remove the bracket screw locking the card down.
Grasp the card by the edges and pull it
straight out of the motherboard slot. If
the card sticks in the slot, rock it gently
from end to end to dislodge it.
Remember to save the screw.
Chapter 2
Summary of Contents for AT008
