background image

ST

AR

TUP MANUAL

ECU-P1706 Startup Manual  1

ECU-P1706

250 kS/s 16-bit Simultaneous 8-ch Analog Input PCI-104 Card 

Packing List

Before you begin installing your module, please make 

sure that the following materials have been shipped:

 

ƒ

ECU-P1706 card

 

ƒ

Energy Series Driver and Utility DISC

 

ƒ

Quick Start User Manual

 

ƒ

1 x Front Panel (for ECU-P1706)

 

ƒ

2 x 18 pin plug-in-blocks

 

ƒ

6 x M3 bolts   

 

ƒ

1x ROHS list

 

ƒ

1 x Warranty card

If any of these items are missing/damaged, contact
your distributor or sales representative immediately.

Notes

For more information on this and other Advantech
products, please visit our websites at:

http://www.advantech.com
http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com.tw/eservice

This manual is for ECU-P1706.
Part No: 2003I70601

2nd Edition
December 2013

User Manual

For more detailed information on this product, please 

refer to the ECU-P1706 user manual on the CD-ROM 

(PDF format). CD:\ ECU-P Cards\ECU-P1706\User's 

Manual.

Declaration of Conformity

FCC Class A

This equipment has been tested and found to 

comply with the limits for a Class A digital device, 

pursuant to part 15 ofthe FCC Rules. These limits 

are designed to provide reason-able protection 

against harmful interference when theequipment 

is operated in a commercial environment. This 

equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in 

accordance with theinstruction manual, may cause 

harmful interference to radio communications. 

Operation of this equipment in a residential area is 

likely to cause interference in which case the user is 

required to correct interference at his own expense.

CE

This product has passed the CE test for environmental 

spec-ifications when shielded cables are used 

for external wiring.We recommend the use of 

shielded cables. This kind of cable is available from 

Advantech. Please contact your local representative.

Overview

The ECU-P1706 is an advanced high-performance 

multifunction card based on the Universal PCI-104 

bus.The maximum sampling rate of ECU-P1706 is 

up to 250 kS/s with 8 A/D converters simultaneously 

sampling on each channel, With a large FIFO of 

8K Sample.The ECU-P1706 has two 32-bit Time/

counter  channels  so  that  it  can  provide  specific 

functions for different application requirements.

Summary of Contents for ECU-P1706

Page 1: ... and found to comply with the limits for a Class A digital device pursuant to part 15 ofthe FCC Rules These limits are designed to provide reason able protection against harmful interference when theequipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with theinstruction manual may cause h...

Page 2: ...onvert clock external Input External up to 250 K or internal up to 10 M EXT_AI_Tri DGND Input AI Trigger external Input External Analog software as set by software Specifications General Power Consumption Typical 5V 850mA Bus Type PCI 104 I O Connector Plug in Terminal Block Operating Temperature 20 70 C 4 158 F 5 85 RH Storage Temperature 40 80 C 40 176 F Storage Humidity 5 95 RH non condensing I...

Page 3: ...urce as rising edge or falling edge The Trigger has several sources External digital TTL trigger from terminal board Soft trigger Threshold trigger Figure 2 Trigger Source and CLK Source Connection Counter Event Counter Figure 3 Event Counter Connection Frequency Measurement Figure 4 Frequency Measurement Connection Time Pulse Figure 5 Pulse Connection One shot Connection When the Gate pin receive...

Page 4: ... pins with the PCI 104 connector Slide the module into the connector The module pins may not slide all the way into the connector do not force the pins into place or the module may be damaged 6 Fasten the module to the CPU card by using the included brass screw Screw the brass spacer into the threaded hole on the CPU card Do not tighten too much or the threads may be damaged 7 Reinstall the CPU ca...

Reviews: