Radeon AT008, User Manual

Page: 13 / 49

FIC Graphic Card User Manual
2-2
motherboard, refer to the manual for the system or motherboard for
information on how to disable it.
3. Insert the Graphics Accelerator card.
Locate the empty AGP socket on the
motherboard and use the following
instructions to insert the Graphics
Accelerator reference card into that
socket:
Grasp the Graphics Accelerator
reference card by its edges.
Align it with the empty AGP socket on
the motherboard, and gently insert it into place.
Make sure that the card is pressed evenly and completely into the
socket.
Fasten the card with the bracket screw.
Note: Use the figure above to help locate the Accelerated Graphics
Port (AGP) socket on your motherboard. The exact configuration of
the components on your motherboard may differ from the figure. Look
for a single, smaller socket between the set of PCI sockets and the
processor.
4. Reconnect all cable and Replace the cover.
Plug the cable from your
computer monitor into the back
of the Graphics Accelerator
reference card. Make sure it is
securely fastened.
Carefully replace the computer
cover and plug the power cord
back in.