4.5. Model offerings
RipEX radio modem has been designed to have minimum possible number of hardware variants. Dif-
ferent HW models are determined by frequency, internal GPS and separate connectors for RX and TX
antennas.
RipEX radio modem has been designed to have minimum possible number of hardware variants. Up-
grade of functionality does not result in on-site hardware changes – it is done by activating software
feature keys (see chapter
RipEX in detail
and
Adv. Config., Maintenance
).
4.5.1. Ordering code (Part No’s)
Trade name:
RipEX
Type
(according to bands): RipEX-160, RipEX-300, RipEX-400, RipEX-900.
Code
(according to the tuned frequency and specific HW models): e.g. RipEX-368, RipEX-432DG etc.
RipEX – XXXyyy
XXX
– base frequency
135
135–154 MHz
154
154–174 MHz
300
300–320 MHz
320
320–340 MHz
340
340–360 MHz
368
368–400 MHz
400
400–432 MHz
432
432–470 MHz
yyy
– HW models
empty – basic model
D
– separate connectors for RX and TX antennas (Part No. RipEX-HW-DUAL)
G
– internal GPS module (Part No. RipEX-HW-GPS)
Code examples:
RipEX-368
= RipEX for frequencies from 368 to 400 MHz
RipEX-400G
= RipEX for frequencies from 400 to 432 MHz, with GPS module
RipEX-432DG
= RipEX for frequencies from 432 to 470 MHz, with separate Rx and Tx antenna con-
nectors, with GPS module
SW feature keys
ROUTER
– enables Operating mode Router. If not activated, only Bridge mode is available (Part No.
RipEX-SW-ROUTER)
83
– enables two highest Data rates (Part No. RipEX-SW-83)
COM2
– enables the second serial interface configurable as RS232 or RS485 (Part No. RipEX-
SW-COM2)
10W
– enables RF output power 10 W for CPSK modulation (Part No. RipEX-SW-10W)
MASTER
– enables all functionalities of all possible SW feature keys (Part No. RipEX-SW-MASTER)
53
© RACOM s.r.o. – RipEX Radio modem & Router
Product