Read own
– it is possible to download the MAC address of this unit. The value in the second unit
has to be manually set to the same value then
•
Auto Toggle mode
When Auto Toggle mode is On (HW button on front panel), controller automatically switches-over
to RipEX ”B“, even if “A” doesn't have any alarm and uses “B” for a set time in order to confirm that
RipEX ”B“ is fully ready-to-operate.
○
Start Date [YYYY-MM-DD]
Fill in the Date in the required format when Auto Toggle mode starts.
○
Start Time [HH:MM:SS]
Fill in the Time in the required format when Auto Toggle mode starts on ”Start Date“ day.
○
Period [min.]
Minimum value 60 min.
Within this period units “A” and “B” will change their activities over. Unit “A” starts to operate at
“Start Date and Time”. When “Period” minus “Unit B” time expires, controller switches to unit
“B”.
○
Unit B [min.]
Minimum value 5 min.
Time when unit “B” will be active within “Period”. It has to be shorter than Period by 5 min.
Time
List box: Manual, NTP
Default = Manual
Internal calendar time of RipEX can be set manually or synchronized via NTP (Network Time Protocol).
•
Manual
RipEX internally uses the Unix epoch time (or Unix time or POSIX time) - the number of seconds
that have elapsed since January 1, 1970. When RipEX calendar time is set, the Unix epoch time
is calculated based on filled in values (Date, Time) and the time zone, which is set in operating
system (computer), where the browser runs.
○
Current Date&Time
Information about the actual date and time in the RipEX
○
Date [YYYY-MM-DD]
Fill in Local Date in required format
○
Time [HH:MM:SS]
Fill in Local Time in required format
○
RipEX Time zone
Select RIPEX Time zone from list box.
Default = (GMT +1:00) Central Europe
This time zone is used for conversion of internal Unix epoch time to "human readable date&time"
in RipEX logs.
○
Daylight saving
List box: On, Off
Default = On
If
On
, Daylight saving is activated according the respective rules for selected RipEX Time zone.
•
NTP
RipEX Radio modem & Router – © RACOM s.r.o.
76
Advanced Configuration