Racom has defined some types of parameters that are often used. The table below shows the defined
parameter types. In addition other types of parameters may exist.
Description
Format
Allowed
charac-
ters
Parameter Type
String must include “@”
Second part must be a valid hostname
user@hostname
a–z
A–Z
0–9
_-.
@ (mandatory)
Fully-Qualified Host Name (FQHN) or host
name
a–z
A–Z
0–9
_-.
hostname
Decimal dotted notation
xxx.xxx.xxx.xxx
Numbers and dots
ipaddress
Decimal dotted notation
xxx.xxx.xxx.xxx
Numbers and dots
netmask
a–z
A–Z
0–9
_-.
@
username
All but &, \", \'
password
+
0–9
*
#
phone number
Time, e.g. for automatic software or config-
uration update
hh:mm:ss
0–9, and :
time
3.2.1. Interfaces related Parameters
Ethernet
Description
Range
Default Value
Parameter
IP address Ethernet
ipaddress
192.168.1.1
network.PrivateInterface.IpAd-
dress
Netmask Ethernet
netmask
255.255.255.0
network.PrivateInterface.Net-
Mask
Mobile Interface and SIM Cards
Description
Range
Default Value
Parameter
PIN code, e.g. 1234
4 digit numeric value
void
simcard.check.pincode
0 = PIN protection disabled
1 = PIN protection enabled
[0,1]
0
simcard.pinStatus
PIN code, e.g. 1234
4 digit numeric value
void
simcard.sim2.check.pin-
code
GPRS/EDGE/UMTS routersM!DGE, MG102 – © RACOM s.r.o.
84
Configuration
