Description
Parameter
Update over mobile or Ethernet Interface?
Mode:
Specify the protocol used to transfer the new software to M!DGE/MG102.
You will need an appropriate server.
Protocol:
Provide a host name and a path to a server which hosts the new software.
For local updates (TFTP) this value is limited to 26 characters.
Server IP address and
path:
The result of the last try will be displayed here.
Last software update:
Step by Step:
Description
Para-
meter
Connect your PC with MG102 using a network cable.
1.
If the IP address has been modified set it back to 192.168.1.1 and the subnet mask to
255.255.255.0
(see also chapter 3.1.3.1).
Your PC must operate in the same subnet as MG102.
2.
Set the IP address of your PC to
192.168.1.2
and the subnet mask to 255.255.255.0
3.
81
© RACOM s.r.o. – GPRS/EDGE/UMTS routersM!DGE, MG102
Configuration
