Time and Region
The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems over
packet-switched, variable-latency data networks. M!DGE/MG102 can synchronize its system time with
a NTP server.
If enabled, time synchronisation is done after the mobile interface is up but before starting any VPN
connections. Later on time synchronisation is performed every 60 minutes.
For Time synchronization from GPS use a non existing address of NTP server e. g. 1.1.1.1.
Description
Parameter
Enable/disable time synchronisation
NTP state:
Host name of NTP server
NTP server:
Host name of optional second NTP server
NTP server 2
(optional):
Time zone
Time zone:
Software Update
Software upgrade from the last official software release to the current release published on www.ra-
com.eu is supported. For further details please consult the release note.
Software downgrade is not supported. Software downgrade may lead to loss of configuration and inac-
cessibility of the device.
79
© RACOM s.r.o. – GPRS/EDGE/UMTS routersM!DGE, MG102
Configuration