Types of Default Messages
● Discrete (i.e. digital, contact) physical channel inputs: “Channel N Normal” and
“Channel N Alarm.”
● Discrete remote channel inputs: “Remote Channel N Normal” and “Remote
Channel N Alarm.”
● Discrete Status-only or Run-time meter physical channel inputs: “Channel N is
ON” when input circuit is closed, and “Channel N is OFF” when input circuit is
open.
● Discrete Status-only remote channel inputs: “Remote Channel N is ONE” or
“Remote Channel N is ZERO.”
● Analog (integer) physical or remote channel inputs: [“Channel N, present reading
is ...”] followed by the recited analog value.
● Station ID message: “ID Number N.”
Record Your Messages
First, minimize any background sounds. Then proceed as follows:
Have your message Worksheet in front of you and be prepared to recite the first Alarm
(fault) Condition message in a loud clear voice within about 6 to 12 inches of the
microphone located at the top of the front panel.
Press:
1 ZZ ENTER
where ZZ is the appropriate 2-digit channel number, such as 01 for channel 1. Be sure
to use leading zeros, in order to keep ZZ a 2-digit entry. Use 00 for the Station ID
message.
