connection you may wish to disable the Telephone Line Fault Detection (Phone Fault)
feature by pressing:
9 17 0 ENTER
Programming Phone Numbers
To program the first dial-out phone number, press:
7 01 (then the complete phone number) ENTER
For example, to program 1 (510) 658-6713 as the first phone number, press:
7 01 1 5 1 0 6 5 8 6 7 1 3 ENTER
To program a second phone number:
Use code
7 02
instead of
7 01
, progressing to a maximum of code
7 16
for the 16th
phone number.
Each number may be up to 60 digits in length. Be sure to include any necessary area
codes or “1” prefixes.
Press the MINUS key to add a 1 second delay to the end of the phone number dialing
process. Default delay is one second.
Refer to Verbatim Help documentation for advanced calling features.
Programming Input Channels
Your Verbatim autodialer needs to know whether its input channels are to be normally
closed (alarm on Open Circuit), or normally open (alarm on Closed Circuit).
