Racktivity PM0816-01, User Manual

Page: 13 / 25

© 2011 Racktivity Inc. 13/25
2100 Seaport Blvd., Suite 400, Redwood City 94063, USA – www.racktivity.com v 2013.11.18
Ambient tab
The Ambient tab shows the environmental parameters being measured.
Sensor
• Airflow : The airflow measured by an optional external sensor (in meters per second)
• Intrusion1 : Shows the state of an optional external intrusion detector
• Intrusion2 : Shows the state of an optional external intrusion detector
Relative Humidity
• Value : The current relative humidity (in %RH)
• Min : The lowest value since the last reset (in %RH)
• Max : The highest value since the last reset (in %RH)
• Reset : resets the Min and Max columns to the current value
• Warning Min : Sets the minimum value at which an SNMP trap is sent
• Warning Max : Sets the maximum value at which an SNMP trap is sent
• SNMP : if checked SNMP traps will be sent when the Warning Min and/or Warning Max
values are crossed.
Temperature
• Temperature : Shows the state of both the internal temperature sensor (on the first row)
and any connected optional temperature sensors
o
Grey background : No sensor connected
o
Green background : Connected and active sensor
• Value : The current temperature (in °C)
• Minimum : The lowest value since the last reset (in °C)
• Maximum : The highest value since the last reset (in °C)
• Reset : Resets the Minimum and Maximum columns to the current value
• Warning Level : Sets the maximum temperature that when crossed causes an SNMP trap
to be sent
• SNMP : If checked SNMP traps are sent when the Warning Level is exceeded
After editing the settings on the Ambient tab, press the Save Data button. A pop-up will appear
after the changes have been successfully saved.
Settings tab
General
• PDU Name : Name of the PDU
• Rack Position : Optional administrative parameter that indicates where the PDU is
installed.
Port Name
• Sets the preferred port names, typically the internal identification used for the connected
devices