© 2011 Racktivity Inc.
7/25
2100 Seaport Blvd., Suite 400, Redwood City 94063, USA – www.racktivity.com
v 2013.11.18
Installation
Mounting the PDU
1.
The PDU comes with brackets for mounting in a rack.
•
Choose the appropriate location for the brackets on the sides of the unit (depending on the
desired deepness).
•
Attach the rack mounting brackets to the unit using 2 retaining screws, provided for each of the
brackets.
2.
Attach the PDU to a vertical rail in your rack. Position the PDU, align the buttons with the
rack mounting slots and fix the PDU with the required screws (not inserted in the package).
3.
When mounting the device, ensure that nothing is leaning on or close to the PDU. Best is to
leave open space for airflow and to assure accurate internal temperature measurements.
The PDU itself is a low power device with a power consumption of only 2 Watt.
Connecting the PDU
1.
The PDU has a detachable power cord. Attach the included power cord to the device by
inserting the IEC C20 connector in to the IEC C20 inlet.
Note:
Optionally, a user-supplied power cord can be attached to the PDU by connecting it to
the IEC inlet. Do not attempt to attach a user-supplied power cord unless it is certified to be
compatible with the input power source that will be used by the PDU.
2.
Connect the input plug to a compatible AC power outlet.
Note:
The AC power source should not share a circuit with a heavy electrical load.
3.
Connect your equipment's input plugs to the outlet plugs of the PDU.
4.
Only when the appropriate port status LED is lit does the PDU provide power to that port.
5.
All blue port status LEDs will light up at first time use.
Note:
When not first time use, it is possible that not all LEDs light up. The PDU will only activate
those ports that were active when power was shut down. Non-lit ports are not active.
Summary of Contents for PM0816-01
Page 1: ...User manual PM0816 01 ...
