© 2011 Racktivity Inc.
22/25
2100 Seaport Blvd., Suite 400, Redwood City 94063, USA – www.racktivity.com
v 2013.11.18
Troubleshooting
Password Reset
Resetting the password can be done on the device itself:
•
Press and hold the
UP
and
DOWN
buttons simultaneously for 4 seconds.
•
The password will now be reset to the factory default settings:
Login:
admin
Password:
1234
This reset only affects the login credentials, no other settings are changed.
Factory Reset
If you would like to reset the PDU to the factory default settings this can be done on the device
itself:
WARNING
! This will completely erase all settings, and could power down all ports. Make sure no
vital equipment is connected to the PDU when performing a Factory Reset.
•
Press and hold the
MENU
and
OK
buttons simultaneously for 4 seconds.
•
The device is now completely erased of user specified settings, the default login values are:
Login:
admin
Password:
1234
Determine Your Firmware
Web Portal
Open the Web Portal on the PDU. The firmware version is displayed in the top right corner after
you log in (next to "SW V" + your firmware version).
OLED Display
On the PDU open the Main menu, then select
Version Numbers
followed by
Software Version
.
The firmware version is displayed at the bottom of the OLED in yellow.
Summary of Contents for PM0816-01
Page 1: ...User manual PM0816 01 ...
