![background image](http://html2.mh-extra.com/html/racal-instruments/3151/3151_user-manual_3124279046.webp)
3151 And 3151A User Manual
Using The Instrument 3-16
Using the Built-In
Standard
Waveforms
The Standard Waveform commands control the various parameters
of the active Standard Waveform. Standard waveform commands
operate in a similar fashion for each of the Standard Waveforms. To
simplify the description of this set of commands, only the standard
waveform commands for the PULSe function are described. Use the
same procedure to program parameters for the SINe, TRIangle,
RAMP, SQUare, SINC, GAUSsian, EXPonential and DC waveforms.
The number of points used to define each Standard Waveform
varies. For SINe and SQUare:
Freq
#
200kHz
Points = 500
Freq < 200kHz
Points =
Freq > 10MHz
Points = 10
For RAMP, PULSE, GAUSSian and EXPonential:
Freq
#
100kHz
Points = 1000
Freq > 100kHz
Points =
For TRIangle and SINC:
Freq
#
200kHz
Points = 500
Freq > 200kHz
Points =
The equations used for generating EXPonential, GAUSian and SINC
functions are as follows:
Freq
MHz
100
Freq
MHz
100
Freq
MHz
100
Summary of Contents for 3151
