- 35 -
O
PERATOR
'
S
MANUAL
KORMORAN SF 180 / SF HA 180
9901.00.07EN04SF - 02/2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
8 C
HANGING
BETWEEN
TRANSPORT
AND
WORKING
POSITION
DANGER:
Risk of electric shock.
,QWKHHYHQWRIFRQWDFWRULQVXI¿FLHQWGLVWDQFH
between the implement and live high voltage power
lines, there is a risk of severe, even fatal injuries
- Never use the implement in the immediate vicinity
of live power lines or electrical equipment.
Maintain a minimum safety distance of 6 m from live
power lines or electrical equipment.
- Never stand close to the implement when it is
used in the vicinity of live power lines or electrical
equipment.
Before driving on a public road:
ʈ
Place the implement in the transport position.
ʈ
Check the operation and cleanliness of the signalling and
lighting devices.
8.1
Changing to transport position
ʈ
Close the offset:
-
0DQXDOO\RUK\GUDXOLFDOO\DFFRUGLQJWRPRGHO
1
Legend
1 Locking
bolt
ʈ
Turn the plough through a quarter turn then lock it in the
WUDQVSRUWSRVLWLRQH[WHQGWKHORFNLQJEROWXVLQJWKH
operating handle.
IMPORTANT:
Manual locking is required in order to hold the
implement in the transport position and thus secure
it in position. The locking bolt ensures that the
implement will remain in the transport position in the
event of erroneous operation of the control valve.
IMPORTANT:
Incorrect operation of the control valve actuating the
offset valve can change the transport position of the
implement. Neutralise the hydraulic control valves to
avoid any incidents (refer to the operator's manual).
CAUTION:
Control valve in free position, there is a risk of
collision between the tyre and the frame of the
implement.
ʈ
Lower the implement: this lowers its centre of gravity,
increasing its stability for transport.
-
0DLQWDLQVXI¿FLHQWFOHDUDQFHWRDYRLGDQ\ULVNRIFRQWDFW
with the ground. Do not fully extend the cylinder, this working
clearance will enable the accumulator to act as a damper on
the lifting circuit.
ʈ
Block all the driver's cab control levers (hydraulic control
YDOYHVOLIWLQJHWFWRSUHYHQWXQH[SHFWHGPRYHPHQWOLDEOHWR
cause an accident.
ʈ
If the tractor is equipped with a stabiliser locking system, lock
it to prevent unnecessary movement.
8.2
Changing to working position
ʈ
Open the offset:.
-
0DQXDOO\RUK\GUDXOLFDOO\DFFRUGLQJWRPRGHO
2
1
Legend
1 Locking
bolt
2 Implement
frame
ʈ
8QORFNWKHORFNLQJEROWE\PHDQVRIWKHRSHUDWLQJKDQGOH
and turn the implement through a quarter turn.
ʈ
The implement is now ready to use.
