- 27 -
O
PERATOR
'
S
MANUAL
KORMORAN SF 180 / SF HA 180
9901.00.07EN04SF - 02/2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
6 H
YDRAULIC
CONNECTIONS
6.1
Required hydraulic control valves
ʈ
GRXEOHDFWLQJ'$IRUWXUQLQJRYHU
ʈ
GRXEOHDFWLQJ'$IRUWKHUROOHUDUP
ʈ
GRXEOHDFWLQJ'$IRUWKHPXOWLIXQFWLRQER[
ʈ
VLQJOHDFWLQJ6$IRUWKHZRUNLQJGHSWK
IMPORTANT:
Pressurised oil may remain in a closed circuit.
Return to reservoir allows evacuation of residual
pressure.
6.2 Max.
hydraulic
Check the service pressure of the tractor's hydraulic system.
Max. pressure: 200 bar / 20 MPa.
ʈ
When connecting, ensure that the hydraulic couplings
DUHFRUUHFWO\SRVLWLRQHGWRDYRLGDQ\ULVNRIK\GUDXOLFÀXLG
escaping.
6.3 Hydraulic
connections
ʈ
Clean the couplings on the implement and the tractor before
connecting the hydraulic circuits.
ʈ
Check that the hydraulic couplings of the implement are
compatible with those of the tractor.
ʈ
Create the following logical connections:
-
Assign the most commonly used functions to the most
accessible levers.
-
Push the control levers to place the implement in the working
SRVLWLRQORZHUIROGRXW
-
Pull the control levers to place the implement in the transport
SRVLWLRQUDLVHIROGLQ
-
Use coloured rings to differentiate the hose lines and their
effects.
Ring colour
Location
Function
Red
Double-acting cylinder
Turning plough bodies
Green
Single-acting cylinder
Working depth
Grey
Double-acting cylinder
Multi-function box
Blue
Double-acting cylinder
Roller arm
* The ring diameter will depend on the diameter of the hydraulic
pipe.
IMPORTANT:
Check the length of the hose lines; they must not
be too short (risk of rupture or tearing), nor too long
(trapping or pinching of the hose in the mechanical
joints, wheels, etc.).
