- 31 -
O
PERATOR
'
S
MANUAL
KORMORAN SF 180 / SF HA 180
9901.00.07EN04SF - 02/2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
7.2
Working width adjustment
The working width of each body can be adjusted by means of the
multi-position shoe.
E.g.: Safety system B multi-position shoe
A
C
E
B
D
1
Legend
1 Multi-position
shoe
Position
Angle
Working width
Inter-body
clearance 1.00 m
Working width
Inter-body
clearance 1.14 m
A
18°
12" - 31 cm
14" - 35 cm
B
21°
14" - 34 cm
16" - 44 cm
C
24°
16" - 41 cm
18" - 46 cm
D
27°
18" - 45 cm
20" - 52 cm
E
30°
20" - 50 cm
22" - 57 cm
Adjustment
ʈ
Place the machine in the working position (approx. 10 cm off
WKHJURXQG
ʈ
Undo the bolt at the front of the beam housing.
ʈ
Undo and remove the multi-position shoe angle adjustment
bolt.
ʈ
Swivel the element to the desired position.
ʈ
*UHDVHUH¿WDQGUHWLJKWHQWKHDQJOHDGMXVWPHQWEROW
ʈ
Re-tighten the bolt at the front of the beam housing.
IMPORTANT:
All bodies must be set to the same angle for correct
operation of the implement.
Do not over-tighten the bolts.
IMPORTANT:
All working width adjustments of each body requires
wheel angle adjustment.
7.3
Wheel angle adjustment
1
Legend
1
Wheel adjustment rod
7KHPHFKDQLFDODGMXVWPHQWURGDGMXVWVWKHDQJOHRIWKH
wheel. The wheel must be parallel to the body when working. An
RSWLRQDOK\GUDXOLFF\OLQGHUFDQEH¿WWHGLQVWHDGRIWKHURG
Adjustments
1
2
Reducing the length of the rod (1):
-
The wheel moves closer to the frame of the implement (2).
Increasing the length of the rod:
-
The wheel moves away from the frame of the implement.
IMPORTANT:
When working, the wheel must always be parallel to
the body.
