Page
24
of
133
Version 3.0 Rev r000
Date 25-08-2010
Part No. 96000001
3.1.3
Mounting the Projector
The projector is secured to the frame with two, 35mm stand offs.
The stand-offs allow room for the Projector to Receive Module
cable to be run. A 6mm drive hex screw secures the projector
through the stand-off.
The Projector’s connector faces towards
the protection fin
. Connect the 0.439m interconnect cable’s
female end to the Projector’s male bulk head connector. When
the connectors are mated, there should be no visible gap between
them. A very light spray of silicon lubricant will aid seating the
connector.
Figure 15: Projector Stand-off
Figure 16: Mounting the projector
Figure 14: Sonic 2024 Projector
Sonic 2024
Sonic 2022
Summary of Contents for 2022
