SDC2000
30 / 40
User Manual
Rev. 1.0 - 12/04/05
Move back to exit the clock setting window; move forward to access
edit mode for available parameters.
Use the knob to move the cursor to the parameter you wish to edit;
when cursor is on the parameter, push the encoder and edit as
required.
DI [...]
Push the encoder when this item is blinking to change
Di state; there are 16 options available.
[clock]
Using the knob, you may view the time, date and time zone set in
this menu.
Move back to exit the clock setting window; move forward to freeze
time and access edit mode .
Use the knob to move the cursor to the parameter you wish to edit;
when cursor is on the parameter, push the encoder and edit as
required. Turn clockwise to increment time, date or time zone; turn
anticlockwise to decrease.
•
Time
format:
hh:mm:tt
absolute time indication
•
Date
format:
dd-MM-yyyy
current date indication
•
GMT
format:
[ + 00.00]
difference from Greenwich Mean Time (GMT) in hours.
Advance is in half-hour increments; the plus sign means
towards EAST, whereas the minus sign means towards WEST.
NOTE: In the example shown in the figure above, the time
sent by R.D.S. would be14:23:37, i.e. actual time.
NOTE: Unless a station covers several time zones, offset may
be left at zero and actual time may be set in place of absolute
time.
6.5.1.4
[system]
System window
