SDC2000
13 / 40
User Manual
Rev. 1.0 - 12/04/05
Main Menu (may only be accessed after entering a valid User Password or when no User
Password has been set)
When the screen shown above is displayed, push the encoder to scroll through listed
items and push it again to select the desired item. The menus shown below are
listed in the order they are accessed when turning the knob clockwise.
6.5.1.1
[vers]
Release information window
This window shows information on the SDC2000 software release. Displayed
information may vary depending on the firmware installed.
Push the knob again to go back to the previous menu.
6.5.1.2
[audio]
Audio Section Submenus
Pushing the encoder when this item is blinking gives access to a set of submenus
where you can edit certain parameters of the audio section.
If the encoder is pushed when in this submenu, field [BACK] begins to blink and you
will be able to move the cursor from field to field by turning the knob in the desired
direction.
Push the encoder again when a field is selected to confirm that you wish to edit the
current selection. Please read the next paragraph for menu edit instructions.
[BACK]
Push the encoder when this item is blinking to cancel selection
mode and go back to scrolling through display screens by turning
the knob.
[Input] (version with PASS-THROUGH MPX)
