R.V.R. Elettronica SpA TLC2000, User Manual

Page: 19 / 128

TLC2000
15 / 50 User Manual Rev. 1.0 - 05/05/03
6. System Status Enquiries
6.1 Local enquiries
The SCM and TLC2000 devices indicate their status locally and concisely by means
of the indicator lights on the front panel. More detailed information can be obtained
from the setting and configuration menus.
6.2 Remote enquiries with remote control software
A PC with the Telecon telemetry and remote control software can be used to obtain a
very detailed view of all system operating parameters and of all the settings both of
the equipment and the devices connected to said equipment.
6.3 Remote enquiries with GSM modem + SMS
Any GSM mobile telephone can be used to query the devices with this system. The
device will respond as outlined in the tables in the sections below.
Before querying the system by means of SMS messages, you must be connected by
means of the "TELECON" program and set the number of the selected phone Service
Center as well as the telephone numbers that can send this type of command to the
devices.
6.3.1 List of SMS messages that can be sent to TLC devices
Inviare: Risposta:
INFO
TLC ID: 000 Nome Stazione
FWD 0%
RFL 0%
TX ON / TX OFF
Audio absent / present
Alarm Standard Disable / Alarm General Disable / All Alarm Disable / All
Alarm Enable
Alarm Present / Alarm Not Present
ALARM TLC ID: 000 Nome Stazione Lista Allarmi in memoria
TXONn TLC ID: 000 Nome Stazione TX is ON
TXOFFn TLC ID: 000 Nome Stazione TX is OFF
OUTONn TLC ID: 000 Nome Stazione OUT is ON / Out Not Exist
OUTOFFn TLC ID: 000 Nome Stazione OUT is OFF / Out Not Exist
OUTIMPn TLC ID: 000 Nome Stazione Impulse OK / Out Not Exist
RESETMOD
RESET
TLC ID: 000 Nome Stazione ALL RESET