R.V.R. Elettronica SpA TLC2000, User Manual

Page: 57 / 128

SCM-TLC
1 / 50 User Manual Rev. 1.0 - 17/01/03
1. Remote Control Software Description
1.1 Functioning
The program exploits the serial connection through RS232 with a modem for the
connection to a remote RVR station.
Each RVR station is composed of several parts called "modules" that can be called
sequentially in order to receive and send data. These data are interpreted in order to
obtain the measurement value to which they refer.
The connection is always realized starting from the first module, either when the station
is composed of several modules (TLC300, TLC2000, SCM) or when the station is
composed of a single module (PTXLCD).
The maximum connection speed is 19200 baud when transmitting with a traditional
telephonic line and 9600 baud when transmitting with a GSM telephone line.
1.2 Installation
• Insert the CD-ROM in the CD-ROM player.
• From the desktop, open "Program Manager ".
•
Double click on the CD-ROM player icon to display its content.
• If you are using Windows2000, double click on the program
"setup_telecon_win2k.exe" to install the software
•
If you are using Windows95, 98 or Me, double click on the program
"setup_telecon_win9x.exe" to install the software
•
It may be required to install the necessary drivers for the access to data, before
installing the software.
•
When the installation is completed, the "Tlc32bit" group which contains the
programs: "Telecon 32bit" and "GSM Init" will be created, then the connection
icons will appear on the Desktop.
System Requirements:
• Windows 95 ®, Windows 98 ® either first or second edition, Windows ME ®,
Windows NT ® and Windows 2000 ®.
•
Processor:
Intel Pentium ® 75 MHz or better.
• Minimum Memory required:
16MB Ram.
•
Minimum capacity on Hard Disk required:
50Mb.