R.V.R. Elettronica SpA TLC2000, User Manual

Page: 72 / 128

SCM-TLC
16 / 50 User Manual Rev. 1.0 - 17/01/03
Node Module Name DBName Module Number Enabled Type Configuration
0 0 Total Node 1 0
1 0 TLCLCD MD_0001 3 -1 TLCLCD >__
1 1 PTX30LCD MD_0002 0 -1 PTX30LCD >____e_
1 2 TLM PJ500 MD_0003 0 -1 TLM2 >____·_
The area "DBName" contains the name of the databases situated in the
\MODULE\Radio1\ folder which contain the information concerning the modules.
1.7 Structure of the database
The TLC300 has one (or two) telemetry cards (8 balanced analogical inputs, 16
analogical/digital inputs and 8 relay outputs) and one I2C.
When seen through the Telecon, each telemetry card present and each unit connected
through I2C appear as Modules
There are some acknowledgements to respect:
1) The first Module (number 0) ALWAYS contains the unit which is equipped with
telemetry.
2) Then the units connected through I2C Bus are shown.
3) Then the telemetry cards
Let's analyze an example of typical station: TX500 equipped with telemetry (TLC300/
T1).
The TX500 is composed of: one PTX30LCD, one PJ500MC and obviously the
TLC300.
The station, for the Telecon, will be composed of:
0 - TLC300
1 - PTX30LCD
2 - Telemetry card for PJ500MC
1.7.1 The modules
Each Module has a corresponding database which contains the data concerning the
available measurements.
The database, contains seven tables:
• Alarm Name
contains the information concerning the alarms
• Analog Input