R.V.R. Elettronica SpA TLC2000, User Manual

Page: 44 / 128

TLC2000
40 / 50 User Manual Rev. 1.0 - 05/05/03
10.2 GSet - General settings
This menu is used to set the general and communication parameters of the change
over system.
• Uart Adr.: sets the address of the change over unit; this is important in a system
in which there are several telemetry and remote control devices
operating in series;
• Baud Rate: sets the data transmission speed, from 1200 to 19200 baud.
• Modem: sets the type of modem:
1) Not Present: no modem connected;
2) Present: data-phone modem;
3) Pager: data-phone modem with alarm indication in the form of
pager messages;
4) GSM: GSM modem with alarm indication in the form of SMS
messages;
• Status: sets the system control mode:
1) Remote: remote control;
2) Local: local control;
• Reset Alm.: completely clears the alarm report and switches off the "GENERAL
ALARM" LED on the main panel;
• RTC: allows you to set the time and date of the internal Real Time Clock.
10.3 Info - Information about system configuration
Displays some parameters characteristic of system configuration. These parameters
cannot be modified.