R.V.R. Elettronica SpA TLC2000, User Manual

Page: 105 / 128

SCM-TLC
49 / 50 User Manual Rev. 1.0 - 17/01/03
5. Massages on the Modem State (only TLC2000)
In this section is described the visualization of the messages state on the display
regarding the modem.
These messages could be in the angle aloft to the right of the display, on the frontal
panel (only of TLC2000) and they inform on the modem current state.
These messages could be:
• Init: Questo messaggio informa che il modem deve ancora essere
inizializzato e quindi la procedura di inizializzazione e' ancora in corso.
•
StdBy: Il modem e' inizzializzato ed in attesa di comandi come si può vedere
anche dall'apposito LED posto sempre sul pannello frontale.
•
wait: Questo messaggio informa che il modem sta tentando di eseguire
un'operazione di invio messaggio o di connessine con altro modem.
•
NoDia: Questo messaggio informa che il modem in seguito ad una
richiesta di operazione non riesce a comunicare.
• Init: This message informs that the modem owes still have initialized
and therefore the procedure of initialization is still in course.
• StdBy: The modem is inizialized and waiting to orders like it could also be
seen from the set relative LED always on the frontal panel.
• Wait: This message informs that the modem is trying to perform an
operation of dispatch message or of connection with other modem.
• NoDia: This message informs that the modem in succession to an
application of operation is not able to communicate.
• ?Busy: This message informs that the modem is busy and it is ignoring the
order that comes him given.
• OkCon: This message informs that the modem communicates with the
outside and is sending a message in SMS or normal form.
• Send>: This message informs that the modem the is about to send message.
• Ok!: This message informs that the modem has sent the SMS with
success.
• Hang: (only PSTN) This message informs that the modem is effecting the
procedure of Hang up and therefore it is interrupting the
communication.