R.V.R. Elettronica SpA TLC2000, User Manual

Page: 51 / 128

TLC2000
47 / 50 User Manual Rev. 1.0 - 05/05/03
The tension applicable to these inputs can have values comprised between 0 and
5V.
The TLC converts these tensions in digital points and that the last use is reserved to
the Telecon Program in which the date base will have to be modified inherent the
wished input for the destined use.
11.4 Rly Output
Inside the white rectangle is evidences the clips relative to the 8 relay outputs described
in table.
Numero pin Significato
RLY1 (C), RLY1 (NO) Relay n°1
RLY2 (C), RLY2 (NO) Relay n°2
RLY3 (C), RLY3 (NO) Relay n°3
RLY4 (C), RLY4 (NO) Relay n°4
RLY5 (C), RLY5 (NO) Relay n°5
RLY6 (C), RLY6 (NO) Relay n°6
RLY7 (C), RLY7 (NO) Relay n°7
RLY8 (C), RLY8 (NO) Relay n°8
+12V, GN12V Alimentazione
The voltage applicable to these outputs can have values comprised between 0 and
200V with current not superior to 500 mA, otherwise it could be caused the destruction
of the relay.
The TLC can excite in 3 different ways (Toggle ON, Toggle OFF, Bistable) every
single relay, and such modality comes given through the Telecon Program in which
the Data Base will have to be modified inherent the wished output for the use to
which it is destined.