R-sensors NDAS-8426N, User Manual

Page: 9 / 88

R-sensors LLC
Bldg. 1, 4, Likhachevsky proezd, Dolgoprudny, 141701, Russia
+7 (498) 744-69-95,
r-sensors@mail.ru
NDAS-N. User Manual.
9
In addition the delivery set may include
4
:

Wi-Fi SMA-M antenna for installation on the housing ………………………………
☐

3G/LTE SMA-M antenna for installation on the housing ……………………………
☐

3G/4G/LTE SMA-M external antenna with a 5-meter length cable … …………… ☐

SMA-M / RP SMA-M adapter (for connecting antennas with SMA-F connector
or the extension cord) ……………………………………………………………………
☐

SMA-M / SMA-M adapter ………………………………………………………………… ☐
The purpose of the cables and connectors in use, pictures of the cables and antennas are given
in Appendix 2 to this Manual.
The following connectors and indicators are located on the data logger’s housing:
On the FRONT side
4
:

Connector marked ‘USB 1’ for connecting digital instruments of YU-USB2-JSX-01-001 type or
YU-USB3-JSX-01-001 of USB-A type;

Data reading connector micro-USB 2.0 IP67;

Antenna connector GPS/GLONASS, SMA-F socket;

Data reading connector LP-24-J/RJ45/213/SX-43-401 marked ‘LINK’, RJ-45 socket;

Power and RS-485 interface connector marked ‘POWER’, DH-20-C07SX-03-401 plug;

Digital instrument activity status orange LED marked ‘USB 1’;

Storage activity status green LED marked 'DISK’;

Synchronization status red/green LED marked ‘SYNC’;

Connection status greed LED marked ‘NET';

Power status red LED marked ‘PWR';

Wi-Fi antenna connector, SMA-F socket ………………………………………………… ☐ ;

3G antenna connector, SMA-F socket ……………………………………………………
☐
.
On the REAR side:

Auxiliary ADC inputs and relay outputs multifunctional connector marked ‘AUX’, DH-24-J19SX-
03-401 socket;

2 analog sensors connectors marked ‘CH 1-3’ and ‘CH 4-6’, DH-20-C12SX-03-401 socket.
The connectors layout, LEDs layout and modes of operation are given in Appendix 1 to this
Manual.
4
☒
- available,
☐
- not available.