R-sensors LLC
Bldg. 1, 4, Likhachevsky proezd, Dolgoprudny, 141701, Russia
+7 (498) 744-69-95,
NDAS-N. User Manual.
56
Fig. 12.1 NDAS-RT device configuration
If the connection to the device is successful, the data transfer to the NDAS-RT will automatically
start and the LED corresponding to the connection port will start flashing.
Data transfer from the device to NDAS-RT starts automatically and is being done regardless
of the data logger’s operation mode – recording of the data into the internal memory card on
the device itself can be both started and stopped.
If two USB ports on the NDAS-RT housing is not enough, you can connect NDAS-One devices via
a USB hub. In this case, connection information will not be displayed on the Device Configuration page
but you can view a list of the connected devices and access their web interfaces through the NDAS One
Manager configuration page.
Only one NDAS-One device can be connected to each specialized NDAS port, that is, only two
devices can be connected to one NDAS-RT through NDAS ports in total.
12.3. NDAS One Manager module configuration page
The module configuration page is divided into three tabs:
Devices, Config, Test
.
